This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TMS570LS3137: Regarding reading and writing to eeprom in tms570ls3137

Part Number: TMS570LS3137
Other Parts Discussed in Thread: HALCOGEN,

Hello .,

Iam working on the project which uses TMS570LS3137 Development kit., I want to use the eeprom in the flash i.e., bank7(64KB) to write and read data, I gone through all the FEE drivers and gone through all the details regarding accessing data., When Iam trying to load the example code provided by the halcogen in the example codes as mentioned below:

Iam getting confusion in following questions:
1. What is meant by data set and data blocks?is each sector has same number of blocks and each block has one data set?
2. Iam using code composer studio where i can see the data access in the memory locations of the development kit?
3. Iam confusing in the data_bit_set and NUMBER_OF_EEPS is there are necessary to access the data from eeprom?
4. What I need to change the example above to run the application above correctly and see the data in memory locations of tms570ls3137?
5.I done all the steps mentioned by the halcogen correctly.l
please give me some clarification, Iam trying it from days.,
please and thank you in advance
surya prakash gupta