• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 30 subscribers
  • Views 328 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TM4C129XNCZAD: LM flash loader not working in windows 10

Rajesh Varma
Intellectual 300 points
Part Number: TM4C129XNCZAD

Dear sir,

We have used Lm flash loader in window 7 and able to dump the code(.bin) through Manual configuration--> Serial Uart

Its working Fine.

but in windows 10 using LM flash loader and tried to dump same  .bin file  but getting error.

I uninstall and install LM flash loader but wont succeed and not able to dump bi file.

  • 0
    TI__Guru*** 135355 points

    Hello Rajesh,

    We have been using this fine on Windows 10 for a while so a few possible ideas come to mind here:

    1) Try running is an Administrator.

    2) Never had to do this myself, but maybe try using compatibility mode for Windows 7

    3) Check that the target device is properly configured and showing up in Device Manager - this error could also be triggered if the UART connection isn't able to be made which could be if the PC isn't recognizing the COM port properly

    Are you using all the same baud rate settings? Is it a custom boot loader or the ROM boot loader on the TM4C MCU?

    Best Regards,

    Ralph Jacobi