RM44L920: Incorrect event capture

Danilo A.

Part Number: RM44L920

Hi Team,

Can you please help us with the issue encountered by our customer while using the eCAP module? Please see the details of the issue below.

I have been working on TI RM44L920APZT MCU. I have been using eCAP module and CAN. Without CAN eCAP is working fine but after implementing CAN it affects the eCAP module by means of incorrect event capture.

What could be the cause of this issue?

Regards,

Danilo

over 2 years ago

0 jagadish gundavarapu over 2 years ago

TI__Guru 69871 points

Hi Danilo,

I didn't see any issue similar to this in the past, so can you please share your code to analyze and debug the issue at our end?

Thanks & regards,
Jagadish.

0 jagadish gundavarapu over 2 years ago in reply to jagadish gundavarapu

TI__Guru 69871 points

Hi,

Closing the thread because of not hearing back from so long.

Thanks & regards,
Jagadish.

Arm-based microcontrollers

Arm-based microcontrollers forum

RM44L920: Incorrect event capture