TMS570LC4357: Support of RTP for Spectrum Digital protrace

Deric Ng

Prodigy 208 points

Part Number: TMS570LC4357

Will the protrace able to support the RAM Trace Port RTP?

over 3 years ago

0 Deric Ng over 3 years ago

Prodigy 208 points

The HDK board has a connection J6 labelled as RTP, 38 pin connector but it is not populated.

0 jagadish gundavarapu over 3 years ago in reply to Deric Ng

TI__Guru* 76666 points

Hi Dreic,

We are working on your issue, and we will provide an update soon.

0 QJ Wang over 3 years ago in reply to jagadish gundavarapu

TI__Guru**** 200146 points

Hi Deric,

RTP is used to trace all accesses to the internal RAM or peripherals without impacting the CPU's code execution. ETM is used to trace the execution of the main Cortex-R5F processor. They use different MCU pins.

The XDS Trace Pro doesn't support RTP.

0 Deric Ng over 3 years ago in reply to QJ Wang

Prodigy 208 points

Hi Jagadish

Thanks, can you recommend any tools that can perform the RTP? I saw that the HDK board consists of the both Mipi60 and 38pin connector. Can i run the protrace and RTP debugger at the same time?

+1 QJ Wang over 3 years ago in reply to Deric Ng

TI__Guru**** 200146 points

Please check Vector VX1000.

Deric Ng said:
run the protrace and RTP debugger at the same time?

RTP signal pins are not multiplexed with ETM signals. They can run at the same time.

Arm-based microcontrollers

Arm-based microcontrollers forum

TMS570LC4357: Support of RTP for Spectrum Digital protrace