AM2434: flash烧录问题，2种方法都失败

Intellectual 295 points

Part Number: AM2434
Other Parts Discussed in Thread: UNIFLASH

你好

1 使用EVM开发板时，烧录flash出现问题，按照SDK中说明，设定boot为NOBoot，在ccs中执行脚本语句，后报出如下错误，这是什么原因呢？

2 在尝试uart烧录时，也是根据SDK中说明进行操作，烧录失败

3 有没有便捷的方法进行flash烧录呢？

类似于C2000系列，在ccs中设定好cmd文件后，使用debug按钮进行编译烧录

或者在uniflash中选择好文件后，直接烧录

谢谢

over 3 years ago

0 Nilabh Anand over 3 years ago

TI__Guru 60080 points

Hi HE HE,

1. It seems you are using HSFS board and NO BOOT mode is not allowed, so this is expected.

2. Please follow this guide to resolve second issue

https://dev.ti.com/tirex/content/mcu_plus_sdk_am243x_08_05_00_24/docs/api_guide_am243x/HSFS_MIGRATION_GUIDE.html

Since most of the differences in HS-FS is related to image signing, once the SBL and application image is correctly built, rest of the flow is the same as GP for application boot. Take care that the right images are used. For example, to use SBL NULL for your application boot, flash the sbl_null.release.hs_fs.tiimage image. Same goes for other SBLs.