AM2634: Files missing :- Support for Mcal integration with Vector

Aswathy jayagopi

Part Number: AM2634

Hello,

We have integrated MCAL_AM263x_00.09.00_07 with Vector SIP. While building Vector hardware specifc file, BrsHw.h expects some files related to AM 2634 Microcontroller.

These files are:

#include "drivers/hw_include/cslr_soc.h"
#include "drivers/gpio.h"
#include "drivers/soc.h"
#include "drivers/pinmux.h"

We couldn't find these files anywhere in SIP and MCAL package. Could you please share information about these files? If it is already in the MCAL package, could you please share the path of the same.

Thanks and Regards

Aswathy J G

over 2 years ago

+1 Ralph Jacobi over 2 years ago

TI__Guru*** 135355 points

Hello Aswathy,

At a glance I would think those are the driver files part of our AM263 SDK which you could find at C:\ti\mcu_plus_sdk_am263x_08_05_00_24\source\drivers

If that is not the case I'll get our MCAL expert looped in to further comment.

Best Regards,

Ralph Jacobi

0 Aswathy jayagopi over 2 years ago in reply to Ralph Jacobi

Prodigy 250 points

Hello Ralph,

Thank you so much for faster reply.

I founded these files in the path mentioned by you.

Regards

Aswathy