Regarding information of DRV2667EVM-CT progarming

Soumyajit Sarkar

Prodigy 105 points

Other Parts Discussed in Thread: MSP-FET, DRV2667EVM-CT

According to manual of DRV2667EVM-CT, it is specifying that MSP430 LaunchPad (MSP-EXP430G2) or MSP430-FET430UIF but this is not available in your website.

1) Is it compulsory for use this product?

2) If require, please suggest me any alternative for this product

3) For this product complilation needs a software please provide me software

10 months ago

0 Jeff McPherson 10 months ago

TI__Mastermind 23015 points

Hi Soumyajit,

The MSP-FET has replaced the MSP430-FET430UIF: https://www.ti.com/tool/MSP-FET

However you don't need those tools to use the EVM. Those are only necessary for advanced use regarding programming the MSP430 on the EVM. Otherwise the only software you need is the Haptic Control Console: https://www.ti.com/tool/HAPTICS-CONSOLE

The user guide for Haptic Control Console also contains instructions on how to use it with the DRV2667EVM-CT.

Thank you,
Jeff McPherson

0 Soumyajit Sarkar 10 months ago in reply to Jeff McPherson

Prodigy 105 points

so I need to buy MSP430-FET430UIF For programing purposases is it???

0 Soumyajit Sarkar 10 months ago in reply to Jeff McPherson

Prodigy 105 points

Acording to you that I proceed but i got an error " hardware is not connected" how to fix it ???

+1 Jeff McPherson 10 months ago in reply to Soumyajit Sarkar

TI__Mastermind 23015 points

The MSP430-FET430UIF or the MSP-FET is only necessary for advanced use of the EVM. Standard use does not require it.

I assume you're talking about Haptic Control Console? What steps are you taking to connect the EVM?

Thank you,
Jeff McPherson

Arm-based microcontrollers

Arm-based microcontrollers forum

Regarding information of DRV2667EVM-CT progarming

According to manual of DRV2667EVM-CT, it is specifying that MSP430 LaunchPad (MSP-EXP430G2) or MSP430-FET430UIF but this is not available in your website.