MSPM0G3507: Cannot enable plotting on MSPM0 analog configurator tool for my MSPM03507 LaunchPad

YiKai Chen

Part Number: MSPM0G3507

to test M0 launchPad with Analog Configurator (I do click “Reconfigure Connected Deivce” to set configuration to my M0 LaunchPad) as the following screenshot.

But I don’t see anything when I enable plotting on ADC0 output. Do you know what step I missed?

over 2 years ago

0 Johnson He over 2 years ago

TI__Mastermind 30386 points

Hi Yikai

I will test this demo and feedback to you soon.

Thanks!

Best Regards

Johnson

0 YiKai Chen over 2 years ago in reply to Johnson He

Guru 735695 points

Johnson HeAny update on this topic?

+1 Johnson He over 2 years ago in reply to YiKai Chen

TI__Mastermind 30386 points

Hi Yikai,

I did some test in my side, looks all OK:

You can follow the below guide and try again:

Thanks!

Best Regards

Johnson

0 YiKai Chen over 2 years ago in reply to Johnson He

Guru 735695 points

Johnson He Thanks for providing exact steps. I can follow them and make it work now.

Arm-based microcontrollers

Arm-based microcontrollers forum

MSPM0G3507: Cannot enable plotting on MSPM0 analog configurator tool for my MSPM03507 LaunchPad