• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 30 subscribers
  • Views 235 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TMDSCNCD263: MCAL_AM263x_08.06.02 - ADC MCAL Example software running issue in DMA mode.

vivek Arivazhagan
Prodigy 120 points
Part Number: TMDSCNCD263

Hi Team,

When we run the DMA mode in ADC conversation not happening. I have attached snapshot below.

Could you please guide us how to verify the DMA mode in ADC conversation?

Thanks

Vivek Arivazhagan

  • +1
    TI__Genius 15435 points

    Hi Vivek,

    Can you please try to run with the 8.6.2.1 version? I have run the same example at my end from this package and it works fine for me.


    ADC_APP: Hardware Triggered Group Notifiation : 1 :)!!!
    ADC_APP: Polling Value Digital Value for 2837mV input is 3521 :)!!!
    ADC_APP: Polling Group Notifiation count is : 0 :)!!!
    Software Group Conversion Initiated in DMA Group ONE SHOT MODE. !!!
    ADC_APP: Group 1 Channel 0 Conversion Completed. Notification count is 1 :)!!!
    ADC_APP: Digital Value for input volatge 2631mv is 3265:)!!!
    ADC_APP: Digital Value for input volatge 2631mv is 3265:)!!!
    Conversion Completed. !!!
    ADC_APP: One Shot AdcGroup Notifiation count is : 1 :)!!!