RM57L843: DMM driver enable is not present in halcogen for rm57l843

VEERAPPAN P

Part Number: RM57L843
Other Parts Discussed in Thread: HALCOGEN

Hi,

I am using RM57L843 Microcontroller. I want to use dmm pins as gio but In halcogen there is no dmm driver enable check box and also there is no .c file for dmm. Please tell how to enable dmm driver.

Thank you,

Veerappan P

over 2 years ago

0 jagadish gundavarapu over 2 years ago

TI__Guru 69891 points

Hi Veerappan,

I started working on this issue and will try to provide an update ASAP.

Thanks & regards,
Jagadish.

0 jagadish gundavarapu over 2 years ago in reply to jagadish gundavarapu

TI__Guru 69891 points

Hi Veerappan,

Even though we don't have .c file for dmm but we do have .h files related to the structures and registers of DMM.

Using these register structures, you can easily control the pin directions, pin SET and Pin CLEAR etc for DMM pins.

Please refer below thread as well:

(+) TMDSRM48HDK: Using RTP and DMM pins GIO functionality - Arm-based microcontrollers forum - Arm-based microcontrollers - TI E2E support forums

Thanks & regards,
Jagadish.