MSPM0L1303: Is it possible to program without NRST

Thank you. Do you know how could i configure the XDS110 to program without NRST pin?

for example, what configuration should i set in uniflash? is it about soft/hard reset?

Hello Xiao,

I see it has been a couple of days since my last response, so I apologize to you.  I believe in this case your only option is the soft reset.  Have you tried this and does it work for you?

i tired soft reset, but it does not work reliably without nrst. to be exact, if i flash the chip, first time it will be successful, second time it will stuck at loading the flash. but if i plug out the xds110 and plug in again, the flashing works again. 

Hi Xiao,

That's strange.  Let me try on my side and see what is going wrong.

another magical thing. when i am using unitflash, flashing with hard reset+without NRST simply works. 
so now I am only confused, but not stuck

Thanks Xiao for the additional information.  I'm going to be discussing this with our SW tools team.  I see a slight difference in the .gel script files between Uniflash and CCS.