• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 30 subscribers
  • Views 159 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TM4C1294NCPDT: Need support in designing a ferrite bead to seperate Analog and digital power supply pins of TM4C1294NCPDTT3R

Amal Babu
Prodigy 90 points
Part Number: TM4C1294NCPDT

Dear Team,

I am designing a EV Charging System with TM4C1294NCPDTT3R as the MCU. The system is a AC Charging station.

I have various voltage and current sensing mechanisms implemented for sensing and measuring the analog voltages.

All those opamps and circuits are operating on analog ground of the controller.

I would like to place a ferrite bead across the Digital and Anlog power supply pins of the MCU to avoid the noise coupling from the Analog power supply to digital power supply.

please guide me in designing the same and selection of the part (ferrite bead) for the design.