TMDSRM48HDK: Arm-based microcontrollers forum

Ankush

Part Number: TMDSRM48HDK

Hi Team ,

I Have recently Bought Two nos. of development kit of Hercules Safety MCU development Kit

RM4 MCU (TMDSRM48HDK) and I am try to connect with Hercules Safety MCU Demo launcher Software but it is not connecting

I have given 12V/1A supply to Development board and USB-mini-B comes with kit .

I have sent you images of my PC what is showing while connecting.

please provide needful guidance .

over 2 years ago

0 jagadish gundavarapu over 2 years ago

TI__Guru 69811 points

Hi Ankush,

These Hercules Demo software's are developed on windows XP, they will not work on windows 10.

So, my suggestion here is don't try to use those demos. Instead of just directly open the source code into CCS and download it to the corresponding board and do the testing's from serial port.

For Example:

I did for LC4357 HDK as below:

1. I opened the source code into the CCS

2. Now i noted the protocol for different commands into the excel:

3. After this i downloaded the code into the controller and i tested from serial port.

As you can see now i am getting proper response from the board for each command.

Thanks & regards,
Jagadish.