MCU-PLUS-SDK-AM243X: How to use ICSSG DUALMAC for instId=1and InstId=3 independently On am243x platform?

wang bin

Hi expert,

My SDK version is 08.06.0045, I test dualmac feature on example icssg lwip project, it work well on instId =0 and instId instId=2 with port 1, when instId=1and InstId=3, I use the same port port 1 or port 2 as you said on example describe Configuring ICSSG DUAL NETIF,it not work . how can i do make it work ?

over 2 years ago

0 Nilabh Anand over 2 years ago

TI__Mastermind 44514 points

Hi Wang,

Could you please explain what do you mean by it does not work, Do you get an error in runtime or does the build break at compile time?

0 wang bin over 2 years ago in reply to Nilabh Anand

Prodigy 245 points

Sorry for make you confused. is it all Enet_MacPort macport need set ENET_MAC_PORT_1 for total four ports if I want to use dualmac mode ? because enet_lwip_icssg example in this sdk make me doubt this point？

0 Nilabh Anand over 2 years ago in reply to wang bin

TI__Mastermind 44514 points

wang bin said:
is it all Enet_MacPort macport need set ENET_MAC_PORT_1 for total four ports if I want to use dualmac mode ? because enet_lwip_icssg example in this sdk make me doubt this point？

Hi Wang, I am sorry but I still do not understand the issue completely, could you please attach code snippet, if you are referring to one.

Arm-based microcontrollers

Arm-based microcontrollers forum

MCU-PLUS-SDK-AM243X: How to use ICSSG DUALMAC for instId=1and InstId=3 independently On am243x platform?