TM4C1231H6PZ: Query about TM4C1231H6PZ

Hi, 

In the tool Uniflash, there is option to choose the connection from on board mcu (JTAG) to our laptop. What intermediate device/programmer device we can use? Can we use device USB2ANY HPA665 in any form?

Thanks

Hi,

  All the supported debug probes are listed in the menu with the highlighted being most popular.  It does not support USB2ANY HPA665. 

Hi,

Can we also use LMFLASH programmer kit LMFLASHPROGRAMMER Software programming tool | TI.com for TM4C1231H6PZ?  as our on-board supports standard JTAG connection. If yes, can you please share prerequisites and manual guide.

Thanks

Hi,

  As I mentioned, the LM flash programmer only support ICDI debug probe. The EK-TM4C123GXL LaunchPad board has an integrated ICDI debug probe. You can use the ICDI on the EK-TM4C123GXL to debug/program your custom board. Follow section 4.6 in this app note https://www.ti.com/lit/pdf/spma075. However, I will strongly suggest you purchase a popular debug probe such as XDS110, XDS200. These are low-cost debug probes. With these debug probes, you can use Uniflash or CCS to program your custom boards. This is what most customers do. 

Thanks Charles,

It's been great help and insight. Regards