AM2432: SORTE_Gデータフレームサイズの指定について

hiroyasu-shimizu

Intellectual 490 points

Part Number: AM2432

受信データのデータフレームサイズは、MII_RT_RX_FRMS0 Register 又は MII_RT_RX_FRMS1 Register で指定するのでしょうか。

over 2 years ago

0 Ming Wei over 2 years ago

TI__Guru 55495 points

Hiroyasu-san,

Can you translate this post into English?

Best regards,

Ming

0 hiroyasu-shimizu over 2 years ago

Intellectual 490 points

Is the data frame size of receive data specified by "MII_RT_RX_FRMS0 Register" or "MII_RT_RX_FRMS1 Register"?

+1 Thomas Mauer over 2 years ago in reply to hiroyasu-shimizu

TI__Expert 5360 points

Hi Hiroyasu-san,

No, this is not related. MII_RT_RX_FRMS0/1 can be configured so ICSS_G will raise an error flag when it reception of frame exceed this byte count. See TRM description for example for RX_MAX_FRM0: "If the FRAME total byte count is more than defined value, RX_MAX_FRM_ERR will get set.".

This register is not use for SORTE_G.

Regards,

Thomas

Arm-based microcontrollers

Arm-based microcontrollers forum

AM2432: SORTE_Gデータフレームサイズの指定について