• State Resolved
  • Locked Locked
  • Replies 3 replies
  • Subscribers 30 subscribers
  • Views 322 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

MCU-PLUS-SDK-AM243X: Inquire about the Baud Rate of the licensed Ethernet/IP stack

Seong Chang Kim
Intellectual 435 points
Part Number: MCU-PLUS-SDK-AM243X

Hello, experts

I have some inquiries, but I would like to check the contents below first.

Does the KUNBUS EtherNet/IP Stack provided on AM243x...F....... only support 100Mbps as shown in the link below?


I want 1Gbps, should I use 3rd party stack?

https://software-dl.ti.com/mcu-plus-sdk/esd/AM243X/08_06_00_45/exports/docs/industrial_protocol_docs/am243x/ethernetip_adapter/eip_datasheet.html#eip_supportedfunctionality

  • 0
    TI__Mastermind 45184 points

    Hi,

    Seong Chang Kim said:

    Does the KUNBUS EtherNet/IP Stack provided on AM243x...F....... only support 100Mbps as shown in the link below?

    Yes we only support 100M EthernetIP.

    Seong Chang Kim said:
    I want 1Gbps, should I use 3rd party stack?

    We currently do not have 1Gbps EThernetIP driver support. Also I am not aware of EthernetIP 1g Stack avaliability with any 3P. 

    Could you please explain more about your project so I can help you better?

  • +1 in reply to Nilabh Anand
    Intellectual 435 points

    Although it is difficult to explain exactly because of the lack of understanding,
    With ICSSG supporting 1000 Mbps speed and industrial communications, we expected to implement 1Gbps Ethernet/IP.

    I'd like to ask you more questions.

    1. Can't KUNBUS ethernet/ip stack be modified because it is binary?

    2. Any implementation plans for Ethernet/IP stacks that support 1Gbps?

    3. Can I port 3rd party Ethernet/IP stack even if C, D, and E are located in F position in AM243x...F....?

  • 0 in reply to Seong Chang Kim
    TI__Mastermind 45184 points
    Seong Chang Kim said:
    Although it is difficult to explain exactly because of the lack of understanding,
    With ICSSG supporting 1000 Mbps speed and industrial communications, we expected to implement 1Gbps Ethern

    It needs a bit of clarification ICSS EMAC FW HAL only supports 100M speed not 1Gbps. For 1Gbps you need to use Enet ICSSG:

    Seong Chang Kim said:
    1. Can't KUNBUS ethernet/ip stack be modified because it is binary?

    No it cannot be modified. Also it only supports 100Mbps.

    Seong Chang Kim said:
    2. Any implementation plans for Ethernet/IP stacks that support 1Gbps?

    No, we do not have 1g implementation of EthernetIP

    Seong Chang Kim said:
    3. Can I port 3rd party Ethernet/IP stack even if C, D, and E are located in F position in AM243x...F....?

    Again for using Enet ICSSG you need to get part D, as it has ethernet modules enabled.