Using CCS.4 to program TMS570

Possessed

Other Parts Discussed in Thread: TMS470R1B1M, HALCOGEN

Is there any header file or examples available for programming TMS570 in CCS.4? For example, when using IAR, there are some h files like 'tms470r1B1m_bit_definitions.h', some other flash.c files and some example showing how to program. Is there anything similar in CCS.4?

Thanks a lot

Rui

over 14 years ago

0 Sunil Oak over 14 years ago

TI__Mastermind 49120 points

Hi Rui,

You can download a tool called HAL Code Generator tool. This will allow you to generate module initialization code for several modules on the TMS570. It will also generate the necessary header files that you are looking for.

There is a video tutorial for importing code generated by HALCoGen into CCS4. You can find it here.

Please let us know if you have any trouble getting started.

Regards,

Sunil

0 Possessed over 14 years ago in reply to Sunil Oak

Intellectual 680 points

Thanks a lot Sunil, i will check that :)

Regards,

Rui

Arm-based microcontrollers

Arm-based microcontrollers forum

Using CCS.4 to program TMS570