LP-AM243: Program the EEPROM

Ming cui

Part Number: LP-AM243
Other Parts Discussed in Thread: UNIFLASH,

Hello,

How to program the EEPROM on the LP-AM243? I downloaded the UniFlash. The UniFlash finds the board but I could not find the place to flash the EEPROM.

Thanks,

Ming.

over 2 years ago

0 QJ Wang over 2 years ago

TI__Guru**** 200206 points

HI Ming,

The EEPROM on LP board can be read/write through I2C0. The I2C address for this EEPROM is 0x50.

0 Ming cui over 2 years ago in reply to QJ Wang

Prodigy 80 points

Understood, My question is whether there is an available tool such as UniFlash to program it directly.

Thanks,

0 QJ Wang over 2 years ago in reply to Ming cui

TI__Guru**** 200206 points

Hi Ming,

The uniflash uses JTAG to erase/program the flash. It doesn't support I2C protocol for EEPROM programming on AM2x boards.

No, we don't have such a tool.

Arm-based microcontrollers

Arm-based microcontrollers forum

LP-AM243: Program the EEPROM