TMS570LC4357: When using MibSPI1, how to configure MISO1 to output

Hi Yale,

Yale Li 李耀先 said:

From the data sheet, it seems that only MibSPI5 can support parallel output.

Actually, that was a typo error.

MibSPI1 will also supports parallel mode up to 2-data lines. whereas MibSPI5 will support parallel mode up to 4-data lines.

High Speed Serial Bus Using the MibSPIP Module on Hercules-Based Microcontrollers (ti.com)

You can confirm it same from above app notes.

And if it won't support 2 bit parallel mode then there is no point of providing two SIMO and two SOMI lines right?

--
Thanks & regards,
Jagadish.