• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 33 subscribers
  • Views 341 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

AM2432: Time synchronization during IO Exchange State

hiroyasu-shimizu
Intellectual 490 points

Part Number: AM2432

［日本語］
　IO Exchange State中に"SOF" フレームを受信し、時刻同期を行う為の”時刻同期を行うフラグ”をセットしている場所は、以下の場所でよろしいでしょうか。
　

［English］
　Is the location below correct for receiving the "SOF" frame during IO Exchange State and setting the "time synchronization flag" to perform time synchronization?

　

  • +1
    TI__Expert 5480 points

    Hi Shimizu-san,

    Yes, this is the correct location. The part gets the IO_EX frame timestamp from the capture registers, stores it for further processing and sets the flag so the time synchronization function can be executed.

    Regards,

     Thomas