MSPM0G3507:MSPM0G3507 : Regarding the errata of COMP

1. I think you can find it in the TRM.

2. Yes, it is. We don't suggest you to set the COM hysteresis in Sysconfig.

Thanks Eason!

My system is using the 8-bit DAC within the COMP module as an input to the COMP.additionally, exchanging the inputs of the COMP ( COMPx.CTL1.EXCH = 1 ).

So my system is affected by both COMP_ERR_02 and COMP_ERR_03.

However, looking at the workaround, the workaround is inconsistent.
How can I deal with this?

COMP_ERR_02, tell you that if you want to change the DAC value and you don't want to see the compare result change, you need to set this:

Don't suggest you use this function:

COMP_ERR_03, tell you that don't use COMP hysteresis features when using input exchange feature.

Thanks. Your answer helped me understand.
As an additional question, I think that COMP_ERR_02 does not affect COMP interrupts, is that correct?