• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 31 subscribers
  • Views 297 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

MSPM0G3507: timer capture mode for edge trigger

Frank(EP) Liu
Expert 5090 points

Part Number: MSPM0G3507
Other Parts Discussed in Thread: SYSCONFIG

hi Expert,

from TRM, there is edge trigger for both edge as 3h in below.

i don't see the setting from sysconfig.

Can I use this setting?

What does MCU really do if setting this?

BR,

frank

  • +1
    TI__Guru 56685 points

    Hello Frank,

    Yes, edge detection on rising and falling edges is supported, and can be seen in Timer Compare mode of Sysonfig. IT looks to be missing in Capture mode - edge detect. I'll add this to our internal bug tracker.