DRV8833: Code Composer Errors "1965 Cannot Open Source File ..."

Charles Moher

Other Parts Discussed in Thread: DRV8833

I'm having a terrible newbie time getting anything to work without errors, that seem to come and go. I see files listed in my project pane at the left side of Code Composer. I add include lines in my C code and I get errors saying the files can't be opened. A search for the file in Explorer says it's not on my computer, yet it shows in that list in CC. What the heck is going on here ?

over 2 years ago

0 Murugavel4637 over 2 years ago

TI__Guru 52635 points

Hello Charles,

Thanks for posting. Sorry to hear you were having CCS related issues. Because you mentioned DRV8833 this post was routed to Motor drivers forum. I think the support device you'd need is a microcontroller TM4C123GXL. I'll try to send it to that forum. Meanwhile you could add that part# instead of the DRV8833. Thanks.

Regards, Murugavel

0 Charles Tsai over 2 years ago in reply to Murugavel4637

TI__Guru**** 191886 points

Hi Charles,

Do you see the __config file in C:\ti\ccs1200\ccs\tools\compiler\ti-cgt-arm_20.2.7.LTS\include\libcxx\__config. In the meantime, I will move your post to our toolchain expert.

0 Charles Moher over 2 years ago in reply to Charles Tsai

Prodigy 120 points

Yes I see that in Explorer , but have no idea why my compiler is not seeing it.

0 Ki over 2 years ago in reply to Charles Moher

TI__Guru**** 476731 points

Charles - can you share your project? You can sent it to me via private E2E message if you do not want to post publicly.

Thanks

Arm-based microcontrollers

Arm-based microcontrollers forum

DRV8833: Code Composer Errors "1965 Cannot Open Source File ..."