• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 30 subscribers
  • Views 151 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TMDSCNCD263P: GPIO Identification Is Incorrect In EVM User Guide (SPRUJ8)

Kier
Mastermind 8855 points
Part Number: TMDSCNCD263P

Hello,

It looks like the following pins are labelled with the wrong GPIO ID:

This is pretty confusing when you just want to flash the LEDs.

  • +1
    TI__Expert 6835 points

    Hello Kier, 

    Thank you for flagging the incorrect mapping. This issue has been identified already and is currently being addressed. A new revision of the User Guide will be published by late next week that will fix all identified issues (including this one).

    Regards,

    Erik