AM2434: Gb or 10/100Mb Ethernet Support on some ICSS firmware

Hideaki Matsumoto

Part Number: AM2434

Hi,

My customer would like to confirm if the following firmware on PRU-ICSSG of AM243x can support Gb or 10/100M Ethernet. Where can they confrim it ? Where in SDK document ?

- Dual EMAC

- Switch

- HSR

- PRP

- PTP

Regards,

Hideaki

over 1 year ago

0 Ming Wei over 1 year ago

TI__Guru 55315 points

Hi Hideaki,

Due to the holidays, the response may be delayed. Thank you for your patience!

Best regards,

Ming

0 Nilabh Anand over 1 year ago in reply to Ming Wei

TI__Mastermind 45814 points

Hideaki Matsumoto said:
- Dual EMAC

- Switch

Hi Hideki,

Enet-LLD is gigabit driver for CPSW and PRU ICSSG - https://software-dl.ti.com/mcu-plus-sdk/esd/AM243X/latest/exports/docs/api_guide_am243x/enetlld_top.html#enetper_icssg

AM243x MCU+ SDK: Ethernet and Networking (ti.com)

All the examples of Enet using ICSSG supports 1G Ethernet.

0 Nilabh Anand over 1 year ago

TI__Mastermind 45814 points

Hideaki Matsumoto said:
- HSR

- PRP

- PTP

The ICSS EMAC driver is a 100M driver for industrial protocols. PRP,HSR, EIP and PTP etc are supported on ICSS EMAC with 100M speed.

0 Nilabh Anand over 1 year ago in reply to Nilabh Anand

TI__Mastermind 45814 points

Also please ask customer to check gtp-tsn ICSSG based example(Gigabit)

Arm-based microcontrollers

Arm-based microcontrollers forum

AM2434: Gb or 10/100Mb Ethernet Support on some ICSS firmware