MSP432E401Y: CCS Registers view: value column missing

I have a hunch that it will be displayed when you move the focus to (click on) the debug probe:

Hi Peter,

In the register window, click on the three dots. See below. After you click, go to Layout->Select Columns and you will be able to select which columns to view. 

Hi Charles,

It would have been too nice but unfortunately not. Also the click on the context functions suggested in the previous response does not help.

Regards
Peter

I will forward your question to the CCS experts. 

Peter - Please trey resetting the CCS Debug perspective as mentioned in the below post:

https://e2e.ti.com/support/processors-group/processors/f/processors-forum/1308088/ccstudio-ccs12-ccs12-5-etc/4969159#4969159

Thanks

ki 

Unfortunately not. It will just move the Windows around to CCS default but the column does not reappear.

Can you try troubleshooting steps 9.4.2 and 9.4.3 of the same document?

https://software-dl.ti.com/ccs/esd/documents/users_guide/ccs_troubleshooting.html#general-ide