About the CC2340R5 evaluation board，Development environment consulting

lxy

Other Parts Discussed in Thread: CC2340R5, UNIFLASH, LP-XDS110ET, LP-XDS110, TMDSEMU110-U

Hi，Team：

When we use the IAR compiler to develop the CC2340R5 chip, do we support the XDS110 burning program? In addition, when mass production is required, what tools and software do we use for mass production?thanks a lot。

over 1 year ago

0 FI over 1 year ago

TI__Mastermind 21130 points

Hi,

I have forwarded this to our SW for a response.

They will update this thread as soon as possible.

Regards,

0 lxy over 1 year ago in reply to FI

Prodigy 180 points

Hi.FI:

Thank you for your answer。Looking forward to your reply，thanks a lot。

+1 desouza over 1 year ago in reply to lxy

TI__Guru**** 171004 points

Hi,

Support for CC2340R5 was added in IAR version 9.40 and it fully supports XDS110 Flash programming.

Mass production systems are not directly supported by TI. We recommend using multiple XDS110 Debug Probes in parallel and Uniflash.

The choices for XDS110 Debug Probes are either the LP-XDS110, LP-XDS110ET or the fully enclosed TMDSEMU110-U for added robustness in a factory floor.

Another reference:

https://e2e.ti.com/support/wireless-connectivity/bluetooth-group/bluetooth/f/bluetooth-forum/1262465/cc2340r5-cc2340-production-programming

Cheers,

Rafael

Arm-based microcontrollers

Arm-based microcontrollers forum

About the CC2340R5 evaluation board，Development environment consulting