LAUNCHXL2-TMS57012: Simulation setup

Vamsi Chava

Part Number: LAUNCHXL2-TMS57012
Other Parts Discussed in Thread: HALCOGEN

Hi,

We are trying setup LDAR tool for the one of the projects based on TMS570. does any of you familiar with simulation setup for TMS570 to run the test? or how did you run the unit test without actually HW not connected?

over 2 years ago

0 QJ Wang over 2 years ago

TI__Guru**** 201486 points

Hi Vamsi,

1. You can download TMS570 HALCOGen CSP from ti.com. The CSP contains the test cases and Test Automation Unit GUI. The LDRA tool is required to run the CSP. The customer has to purchase the LDRA tool from LDRA company.

https://www.ti.com/tool/SAFETI-HALCOGEN-CSP?keyMatch=HALCOGEN%20CSP

2. To run the test cases (unit test or functional test), the TMS570 HW has to be connected

0 Vamsi Chava over 2 years ago in reply to QJ Wang

TI__Prodigy 30 points

Hi Wang,

Thank you for your feedback. Is it possible to run test without connecting to TMS570 HW ?

0 QJ Wang over 2 years ago in reply to Vamsi Chava

TI__Guru**** 201486 points

Hi Vamsi,

The CCS doesn't support core simulation for Hercules devices.

0 Vamsi Chava over 2 years ago in reply to QJ Wang

TI__Prodigy 30 points

Hi Wang,

Oh ok. Then only option is to hook up the TMS570 HW to run the test. thank you for clarification.

Arm-based microcontrollers

Arm-based microcontrollers forum

LAUNCHXL2-TMS57012: Simulation setup