WL1837MODGIMOCT

Hi Ramin,

Do you have the WL1837 on a custom board or are you using a TI EVM?

We own two EVM boards J721EXCP01EVM and SK-AM62A-LP  EVM boards

Those EVMs do not have WL1837, so how will you connect it?

That is what I am asking you, TI tech support how to add Bluetooth to DRA8xxx CPU

Please advise

Thank you

The Sk-TDA4VM support M.2 Key E connector, which can support WiFi/BT connections via MMC/SDIO and UART interfaces.  It has a 2nd M.2 connector that is design for SSD modules (only supports PCIe)

www.ti.com/.../SK-TDA4VM

I can take care of that by using SEED Studio 113990814(mouser 713-113990814)

Thank you

Regards

I'm not aware of the software availability/support for that interface.  The Wifi/BT modules I seen tested for that connector are PCIe based (higher bandwidth).

It does not require any special software.

Thank you

Problem solved