MSP-EXP432E401Y: GPIO Configuration

Biruk Damitie

Part Number: MSP-EXP432E401Y
Other Parts Discussed in Thread: MSP432E401Y

Hello, everyone,

I'm confused about the GPIO pin configuration on the actual board. I just want to use Pin number 7 on the MSP432E401Y microcontroller, but I don't know where Pin number 7 is on the actual MSP432E401Y board.

Can anyone explain it to me?

over 1 year ago

0 Keith Barkley over 1 year ago

Guru 42145 points

We need some context, where do you see it labeled "Pin 7"?

0 Charles Tsai over 1 year ago

TI__Guru**** 191906 points

Hi,

Are you sure you really mean pin 7?

Pin 7 in MSP432E401Y is a VDD pin. It is not a GPIO pin.

Or you are referring to the pin 7 on the J1 connector for the BoosterPack 1 which is PD3. See below.

Or you are referring to pin 7 on the J5 connector which is GPIO PQ0. See below.

+1 Charles Tsai over 1 year ago in reply to Charles Tsai

TI__Guru**** 191906 points

You reject the answer without giving a reason.

0 Biruk Damitie over 1 year ago in reply to Charles Tsai

Prodigy 200 points

Thanks, Charles Tsai. Your answer resolved my issue.

Arm-based microcontrollers

Arm-based microcontrollers forum

MSP-EXP432E401Y: GPIO Configuration