AM2634: IAR workbench setup for AM2634

Rohal

Part Number: AM2634

Dear All,

I want to set up IAR workbench for AM2634 firmware development but I didn't find any source by which IAR can be used for AM2634.

Import CCS project example to IAR is very complex and time consuming, So guide me how to CONFIGURE IAR for AM2634 mCU

over 1 year ago

0 Ankur Baranwal over 1 year ago

TI__Mastermind 26205 points

Hi Vikas,

Currently IAR is not supported by AM263x MCU+ SDK and will require porting the SDK to support the same. We don't have immediate plans to enable the same.

Regards,

Ankur

0 Rohal over 1 year ago in reply to Ankur Baranwal

Intellectual 495 points

please share the porting documents if available

0 Ankur Baranwal over 1 year ago in reply to Rohal

TI__Mastermind 26205 points

Hi Vikas,

We don't have any porting document for IAR available at the moment.

May I know the issues you are seeing with CCS?

Regards,

Ankur

0 Rohal over 1 year ago in reply to Ankur Baranwal

Intellectual 495 points

No, I'm not facing any issue by using SDK on CCS,

I'm working on SIL4 safety integrity that why i need IAR, IAR compiler support Safety Integrity that why i need SDK on IAR.

Kindly let me know which safety level Ti Compiler support.

0 Sunil Kumar M S over 1 year ago in reply to Rohal

TI__Genius 12330 points

Hi Vikas,

TI provides Compiler Qualification Kit for functional safety development. Please refer details below.

software-dl.ti.com/.../appnote-codegen_qualificationkit.html

www.ti.com/.../SAFETI_CQKIT

BR,

Sunil

0 Rohal over 1 year ago in reply to Sunil Kumar M S

Intellectual 495 points

Thanks Sunil,

Actually I'm working on Railways project in which we need SIL-4 safety level as per IEC-50128 standard,

So kindly let me know is Clang compiler or Compiler qualification kit support IEC-50128 standard ?

0 Sunil Kumar M S over 1 year ago in reply to Rohal

TI__Genius 12330 points

Hi Vikas,

Will assign to compiler team to check if this Q kit is applicable for Rail safety standard as well.

BR,

Sunil

+1 George Mock over 1 year ago in reply to Sunil Kumar M S

TI__Guru**** 249005 points

Rohal said:
let me know is Clang compiler or Compiler qualification kit support IEC-50128 standard ?

The Safety compiler qualification kit is not documented to support EN 50128. Nonetheless, I encourage you to download it and read through the documentation. It won't take long. And it might do more than you think.

-George

Arm-based microcontrollers

Arm-based microcontrollers forum

AM2634: IAR workbench setup for AM2634