MSPM0L1306: how to add external flash memory to MSPM0L1306

robin Moon

Expert 1510 points

Part Number: MSPM0L1306

Hi expert,

I'm considering adding external serial flash memory to MPSM0 for TFT LCD Control.(LCD interface is SPI.)

is it possible to add a large amount of Flash to MSPM0?

if possible, please guide me on how to set the flash and provide a examples.

thanks

regards,

0 Helic Chi over 1 year ago

You can choose a serial flash first.

Common Flash vendor always provide code demo.

The common interface is SPI, and you can use two software-controlled CSs to control LCD and Flash with single SPI bus.

Regards,

Helic

0 robin Moon over 1 year ago

Expert 1510 points

Hi Helic

I'm sorry my question is ambiuous.

is it possible to expend memory using external flash memory?

please let me know how to expend flash using external flash with SPI.

thanks

0 Helic Chi over 1 year ago in reply to robin Moon

MSPM0 doesn't support flash memory expansion.

But you can using external flash as storage.

Regards,

Helic

Arm-based microcontrollers forum