MSPM0C1104: Flash programmer for NONMAIN expects 6 words

Munan Xu

Part Number: MSPM0C1104
Other Parts Discussed in Thread: SYSCONFIG, MSPM0L1306

Hello,

NONMAIN memory on the MSPM0C1104 is 5 32 bit words long, but the flash programmer is expecting to program 64 bits at a time. Is it better to leave the warning or is it safe for the customer to pad NONMAIN by 1 word so that it's aligned with the 64bit requirement?

Munan

over 1 year ago

+1 Yuhao Zhao over 1 year ago

TI__Genius 9780 points

Hi Munan,

The structure of M0C is similar to M0L/M0G(although it is much shorter). To config the nonmain, you can simply config it in sysconfig. Or you can refer to the example(flashctl_nonmain_memory_write_LP_MSPM0L1306_nortos_ticlang).

Thanks,

Yuhao

0 Munan Xu over 1 year ago in reply to Yuhao Zhao

TI__Expert 4940 points

Hi Yuhao,

Ok thanks for the feedback. Just for completeness it looks like based on the hex file output that sysconfig appends another 32 bit word consisting of all 1's (0xFFFFFFFF).

Munan

Arm-based microcontrollers

Arm-based microcontrollers forum

MSPM0C1104: Flash programmer for NONMAIN expects 6 words