TM4C123GH6PM: TM4c123GH6PM

Ahmet Gokay

Part Number: TM4C123GH6PM
Other Parts Discussed in Thread: EK-TM4C123GXL

We are using your Keil uVision software as part of the Microprocessors course. The card we want to use is TM4C123GH6PM. The driver support link on your site (www.ti.com/.../getliterature.tsp does not work. Without the driver plugin, the software gives a debugger error and does not upload the codes to the card. You can see the error in the attachment. I wonder where I can access the files here?

over 1 year ago

0 Charles Tsai over 1 year ago

TI__Guru**** 191886 points

Hi,

- Are you using EK-TM4C123GXL LaunchPad? Or you have your custom board with the TM4C123GH6PM MCU on it.

- What driver are you talking about? Who gave you this link www.ti.com/.../getliterature.tsp. I can't access the page either.

- If you are using EK-TM4C123GXL, then visit the product page at https://www.ti.com/tool/EK-TM4C123GXL. All documents and software collaterals can be found on the product page.

- For Keil uVision specific questions, consult with the tool vendor. We can only support CCS which is a TI tool.

Arm-based microcontrollers

Arm-based microcontrollers forum

TM4C123GH6PM: TM4c123GH6PM