MSP432E401Y: MSP432E401Y Application using TI-RTOS runs inconsitently, crashes after minutes, or sometimes hours

Perry Ferren

Part Number: MSP432E401Y

Hello

I have a MSP432 TI-RTOS application that runs sometimes for hours and sometimes only for a few minutes.

When I use the ROV it looks like all created tasks Stack sizes are fine as shown, however when I look at the BIOS task and scan for errors I get a stackpeak overrun!

Please advise.

Thank you in advance,

Perry

over 1 year ago

0 Charles Tsai over 1 year ago

TI__Guru**** 191366 points

Hi,

Did you try to increase the stacksize for the cbitThread task from 1024B to something higher and did that resolve the issue?

0 Perry Ferren over 1 year ago in reply to Charles Tsai

Prodigy 140 points

Hi Charles

Yes, I did and this does seem to have resolved the issue, application has been running fine all week. Thanks again for your response. Appreciated.

Arm-based microcontrollers

Arm-based microcontrollers forum

MSP432E401Y: MSP432E401Y Application using TI-RTOS runs inconsitently, crashes after minutes, or sometimes hours