This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

AM2634: Trace signals configuration

Part Number: AM2634

Hi team

Am263 has Trace lines TRC_0-15, TRC_CLK, TRC_CTL

Few required pins are muxed with trace signals.

Can we configure the trace signals with less signal lines count?

If possible what are the minimum possible trace signals required ? Please mention

Regards

Vishnu

  • Hi Vishnu,

    The number of TRACE signals needed depends on the user's application and what they are using with TRACE. To give an absolute number of signals required, I would need more information to confirm any concrete value - the number of data lines are arbitrary based on what debugger you are talking to.

    For example, the Lauterbach TRACE debug probes supported with AM263x can support an arbitrary number of pins from 1 to 32. Other types of debug probes are not as flexible - some require power of 2 multiples, etc.

    Regards,

    Brennan