TMDSEMU200-U: Part number of connectors

Hey Ki!

I am sorry I wasn't clear.

The IDC cable that came along with the debugger is damaged. I want to make a new one. So, I require the part numbers of both the 20 pin IDC connectors that are on either sides.

I would follow up with the vendor directly for this information.

Thanks

ki

Hey Ki!

This is a reminder regarding the connector part numbers.

Thanks!

Cleatus

Ki said:

I would follow up with the vendor directly for this information.

I what I meant by the above quote is that I suggest you follow up with the vendor. The part in question is vendor specific.

Note that the vendor of the debug probe in question is Blackhawk:

https://www.blackhawk-dsp.com/company/contacts

Thanks! I have contacted them.

Sure, np,

I meant to provide the link to their support page instead of their general contact page:

https://www.blackhawk-dsp.com/support