AM2432: use case evaluation

Joyce Gao

Part Number: AM2432

Hi expert,

Customer is seeing if AM2432 could fit their new multi protocol servo drives project having these questions:

1.Does TSN support switch functions?

2. Can the application of 1-to-2 FOC requiring PWM frequency of 100K plus ECAT communication be realized? If it can achieve DC synchronization cycle, how much can it achieve?

Thanks!

Joyce

12 months ago

0 Tushar Thakur 12 months ago

TI__Mastermind 39313 points

Hello Joyce,

Thanks for reaching out to Texas Instruments E2E support forum.

Our domain expert is out of office for couple of days. Responses to this thread might be delayed.

Thanks for your patience.

Regards,

Tushar

0 Joyce Gao 12 months ago in reply to Tushar Thakur

TI__Intellectual 2470 points

Hi Tushar,

This case is in urgency for customer's decision on whether or not use TI's solution, customer is making decision this week, please help check internally for anyone who could provide insights, thanks!

Joyce

0 Pekka Varis 12 months ago in reply to Joyce Gao

TI__Mastermind 26040 points

In the future I recommend asking two unrelated questions as two different posts.

Joyce Gao said:
1.Does TSN support switch functions?

Yes. See https://www.ti.com/lit/pdf/spry316 for high level overview, https://software-dl.ti.com/mcu-plus-sdk/esd/AM243X/latest/exports/docs/api_guide_am243x/ENET_CPSW_TSN_GPTP.html for details.

Joyce Gao said:
2. Can the application of 1-to-2 FOC requiring PWM frequency of 100K plus ECAT communication be realized? If it can achieve DC synchronization cycle, how much can it achieve?

Basically yes if I understand your question, see https://www.ti.com/lit/pdf/sprad03 for more benchmark details and some further EtherCAT benchmarks at https://software-dl.ti.com/processor-industrial-sw/esd/ind_comms_sdk/am243x/latest/docs/am243x/ethercat_slave/ethercat_datasheet.html .

Pekka

0 Joyce Gao 11 months ago in reply to Pekka Varis

TI__Intellectual 2470 points

Hi Pekka,

Thanks for your reply. For the second question here's an easier description: Could AM2432 support single chip to drive 2 servo motors with 20kHz PWM plus ECAT communication, and DC sync time shorter than 500us?

Thanks

Joyce

0 Pekka Varis 11 months ago in reply to Joyce Gao

TI__Mastermind 26040 points

Yes, see post above for links. 50us cycletime with DC as stated in link https://software-dl.ti.com/processor-industrial-sw/esd/ind_comms_sdk/am64x/latest/docs/am64x/ethercat_slave/ethercat_datasheet.html . Details on FOC loop and PWMs in the other link https://www.ti.com/lit/pdf/sprad03 .

Arm-based microcontrollers

Arm-based microcontrollers forum

AM2432: use case evaluation