MSPM0G1507: Questions about the latch-up spec for MSPM0G1507 MCU

Jacky Wang(QD)

Genius 11140 points

Part Number: MSPM0G1507

Tool/software:

Hi Team,

Customer is asking for latch-up current spec for MSPM0G1507 MCU pins, can you help to provide it?

Thanks a lot!

11 months ago

0 Zain Nasir 11 months ago

Expert 1310 points

Have you checked the datasheet and application notes?

https://www.ti.com/product/MSPM0G1507

www.ti.com/.../mspm0g1507.pdf

0 Jacky Wang(QD) 11 months ago in reply to Zain Nasir

TI__Genius 11140 points

Hi,

We do have checked the datasheet, but not find such spec, please help to provide it. Thanks.

0 Dylan OBrien 11 months ago in reply to Jacky Wang(QD)

TI__Genius 15690 points

Hi Jacky,

I am also not seeing this in our datasheet. Let me check with some internal resources and I will post an update for you in the next few days about what I find.

0 Dylan OBrien 11 months ago in reply to Dylan OBrien

TI__Genius 15690 points

Hi Jacky,

We do not report a latch up current as this should never happen with our devices. Is it possible that you are looking for our ESD diode injection current? This is reported in the device user guide in section 7.1, absolute maximum ratings. We spec this at +/-2mA.

Based on internal discussions I'd also like to point out that you can view and download qualification information from the device product page in the quality and ordering section. If you scroll to the right side of the ordering section you can select to view or download quality information.

Please let me know if you have further questions about this.

Arm-based microcontrollers

Arm-based microcontrollers forum

MSPM0G1507: Questions about the latch-up spec for MSPM0G1507 MCU