AM2634: Multi client connection with multiple server on Ethernet

Rohal

Part Number: AM2634

Tool/software:

Dear Team,

I'm using AM2634 evaluation board and configure multi client on Ethernet port by creating two LWIP instances and two static IP addresses assign also(Ethernet Mode - CPSW)

these IPs are also pingable by server,

The problem is when ever i send data from client to server, second ip sending the data to the server(only) first ip isn't sending the data,

Kindly guide me how to send data from both the client to the server

kindly find my last discussion with TI's Engineer on the same topic,

(4) AM2634: Send data to two servers - Arm-based microcontrollers forum - Arm-based microcontrollers - TI E2E support forums

over 2 years ago

0 Shaunak Deshpande over 2 years ago

TI__Mastermind 27222 points

Hi Vikas,

I request you to not raise duplicate threads for the same issue. I have already looped in other experts and they are running experiments trying to find the issue. Please follow up for further replies on the original thread itself: https://e2e.ti.com/support/microcontrollers/arm-based-microcontrollers-group/arm-based-microcontrollers/f/arm-based-microcontrollers-forum/1369062/am2634-send-data-to-two-servers/5229115#5229115

Regards,
Shaunak

0 Shaunak Deshpande over 2 years ago in reply to Shaunak Deshpande

TI__Mastermind 27222 points

Hi Vikas,

I have responded back on the original thread, please check.

Regards,

Shaunak