MSPM0G1507: DL_TimerA_setCCPDirection() function issue

Tool/software:

Condition: 

1. When I init PWM, this DL_TimerA_setCCPDirection() function causes the GPIO to go high.

SYSCONFIG_WEAK void SYSCFG_DL_PWM_0_init(void) {

    DL_TimerA_setClockConfig(
        PWM_0_INST, (DL_TimerA_ClockConfig *) &gPWM_0ClockConfig);

    DL_TimerA_initPWMMode(
        PWM_0_INST, (DL_TimerA_PWMConfig *) &gPWM_0Config);

    DL_TimerA_setCaptureCompareValue(PWM_0_INST, 10, DL_TIMER_CC_0_INDEX);
    DL_TimerA_setCaptureCompareOutCtl(PWM_0_INST, DL_TIMER_CC_OCTL_INIT_VAL_LOW,
		DL_TIMER_CC_OCTL_INV_OUT_DISABLED, DL_TIMER_CC_OCTL_SRC_DEAD_BAND,
		DL_TIMERA_CAPTURE_COMPARE_0_INDEX);

    DL_TimerA_setCaptCompUpdateMethod(PWM_0_INST, DL_TIMER_CC_UPDATE_METHOD_IMMEDIATE, DL_TIMERA_CAPTURE_COMPARE_0_INDEX);

    DL_TimerA_setCaptureCompareValue(PWM_0_INST, 10, DL_TIMER_CC_1_INDEX);
    DL_TimerA_setCaptureCompareOutCtl(PWM_0_INST, DL_TIMER_CC_OCTL_INIT_VAL_LOW,
		DL_TIMER_CC_OCTL_INV_OUT_DISABLED, DL_TIMER_CC_OCTL_SRC_DEAD_BAND,
		DL_TIMERA_CAPTURE_COMPARE_1_INDEX);

    DL_TimerA_setCaptCompUpdateMethod(PWM_0_INST, DL_TIMER_CC_UPDATE_METHOD_IMMEDIATE, DL_TIMERA_CAPTURE_COMPARE_1_INDEX);

    DL_TimerA_setDeadBand(PWM_0_INST, 0, 22, DL_TIMER_DEAD_BAND_MODE_0);
    DL_TimerA_enableClock(PWM_0_INST);


    
    DL_TimerA_setCCPDirection(PWM_0_INST , DL_TIMER_CC0_OUTPUT | DL_TIMER_CC1_OUTPUT );

}

But I don't want it high for init.

Please let me know if you have any suggestions