AM2432: Import enet project failed

Joshua CH Li

Intellectual 360 points

Part Number: AM2432

Tool/software:

Hi expert,

I get failed message when I import enet_lwip_icssg project.

CCS version: 12.7.0.00007

SDK: ind_comms_sdk_am243x_09_02_00_08

Project: {IND_COMMS_SDK}/mcu_plus_sdk/examples/networking/lwip/enet_lwip_icssg/am243x-lp/

Do you have any advice?

Thanks,

Joshua

over 1 year ago

+1 Nitika Verma over 1 year ago

TI__Expert 7385 points

Hi Joshua,

You can import the same project from mcu_plus_sdk 09.02.00.56 version as well - https://www.ti.com/tool/download/MCU-PLUS-SDK-AM263X

The indus_comms_sdk 9.2 contains the same mcu_plus_sdk version inside it.

Regards,

Nitika

0 Joshua CH Li over 1 year ago in reply to Nitika Verma

Intellectual 360 points

Hi Nitika,

Thank you for your reply.

It works, but we have driver change in mcu_plus_sdk.

We have project base on industrial_comms_sdk example and mcu_plus_sdk example.

If it only can import by two SDK, we need maintain same driver in two SDK.

Does TI have plan to fix this issue?

Thanks,

Joshua

0 Nitika Verma over 1 year ago in reply to Joshua CH Li

TI__Expert 7385 points

Hi Joshua,

We are tracking this issue internally, please expect a fix in the upcoming releases.

Thanks and Regards,

Nitika

0 Nitika Verma over 1 year ago in reply to Nitika Verma

TI__Expert 7385 points

Hi Joshua,

One thing we observed while debugging the issue is, the build with gmake using Makefiles works fine for the Networking examples from mcu_plus_sdk inside ind_comms_sdk.

You can then load the generated .out file from CCS. The steps for this are given here - https://software-dl.ti.com/mcu-plus-sdk/esd/AM243X/09_02_00_50/exports/docs/api_guide_am243x/GETTING_STARTED_BUILD.html

Regards,

Nitika

Arm-based microcontrollers

Arm-based microcontrollers forum

AM2432: Import enet project failed