AM2634-Q1: Device selection not selected.

Tukaram Naik

Part Number: AM2634-Q1

Tool/software:

Hi TI,

I installed CCS version 12.0. Before install, in Device selection not selected Arm-based microcontrollers, Now installation is done is there any option to select device after CCS installation?

Thanks

Tukaram

over 1 year ago

0 Shaunak Deshpande over 1 year ago

TI__Mastermind 21042 points

Hi Tukaram,

We recommend you having a latest version of CCS. Can I know the reason why you specifically prefer 12.0? I would recommend migrating to CCS 12.7.

If you still want to be on 12.0 and add device support, please follow the steps below:

1. In CCS, go to Help -> Install device support

2. Follow the steps and then during custom installation, select the device you wish.

Regards,
Shaunak

0 Tukaram Naik over 1 year ago in reply to Shaunak Deshpande

Prodigy 40 points

Hi Shaunak,

Thanks for your response,

I followed the steps mentioned, but as soon as I clicked "Install Device support CCS", will closes immediately without showing any installation options.

Regards

Tukaram

0 Shaunak Deshpande over 1 year ago in reply to Tukaram Naik

TI__Mastermind 21042 points

Hi Tukaram,

Once it closes, it will relaunch the installer. This time you will have to select the device intended. The projects in your Workspace should not get deleted and once you have this installed you can reopen and work with your older workspace

Regards,
Shaunak

Arm-based microcontrollers

Arm-based microcontrollers forum

AM2634-Q1: Device selection not selected.