• State Resolved
  • Locked Locked
  • Replies 2 replies
  • Subscribers 30 subscribers
  • Views 533 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LP-MSPM0G3507: XDS110-ET Tiva Device Firmware Update Debug Problem

Mehmet Fatih ÇAY
Prodigy 35 points
Part Number: LP-MSPM0G3507

Tool/software:

Hi ,

I m trying to connect LP-MSPM0G3507 eval board by using xds110-et on board debugger but when i connect to board to pc , i m getting this error attached 

I cant find any solution for this problem . Could you please help me ?

Thanks

Fatih

  • 0
    TI__Genius 16000 points

    Hi Fatih,

    Have you already tried programming the device using CCS? What happens when you try this?

    I am wondering if the XDS firmware just needs to update.

  • +1 in reply to Dylan OBrien
    Prodigy 35 points

    Hi ,

    I solved the problem.Board was in dfu mode because of that , on the device manager panel , it can seem Tiva Device Firmware Update or Stellaris Device Firmware Update.

    I connect to xds110 to update firmware by using xdsdfu over command prompt as below:

    I installed 3.0.0.31 because CCS requested it .Now , I can debug over CCS.

     

    Thank you for fast response  ,

    Fatih