AM2634: FSM subsystem reset is not working

Part Number: AM2634

Tool/software:

Hello,

During my development I faced a weird issue, The FSM reset was working fine without any problem but lately, I was updating some configuration files in the application. After that the FSM reset is not working.

The MCAL code did not change (I am using MCAL version 9.1.0.0) and I have made many debugging without finding the root cause.

In the older binary, once I step over _wfi() the ECU resets, but no reset in the newer binary happens.

Could you please guide me on that?

/******************************************************************************
 * Function name: Target_R5SS0TriggerSubsystemReset
 * Description  : Function to trigger Subsystem reset.
 * Parameter    : None
 * Return value : None
 * Remarks      : None
 * REQ          : None
 ******************************************************************************/
static void Target_R5SS0TriggerSubsystemReset (void)
{
    volatile uint32 regVal;
    ctrlBASE_t*   ptrCTRLRegs;

    regVal = 0U;

    /* Get the base address of the MSS RCM configuration registers */
    ptrCTRLRegs = (ctrlBASE_t*)MCAL_CSL_MSS_CTRL_U_BASE;

    regVal = ptrCTRLRegs->R5SS0_CONTROL;

    CSL_FINS(regVal, MSS_CTRL_R5SS0_CONTROL_RESET_FSM_TRIGGER, 0x7);
    ptrCTRLRegs->R5SS0_CONTROL = regVal;

    /* execute wfi, and reset core0 */
    __wfi();
}