MSPM0G1507: How to make flash read protection for the MSPM0G1507 controller

Hello Vivek,

It seems that G series don't have the region which can be configurated to read-execute protection. If you want to set flash read protection, maybe you need to implement it through setting policy of SWD and BSL that disable people read flash through SWD or BSL. You can refer to the 1.4.2.1 Serial Wire Debug Related Policies and 1.4.2.6 Bootstrap Loader (BSL) Enable/Disable Policy in our G series TRM.

MSPM0 G-Series 80-MHz Microcontrollers Technical Reference Manual (Rev. A) (ti.com)

Best Regards,

Janz Bai