MCU-PLUS-SDK-AM243X: import failed for project... because its meta-data cannot be interpreted, please contact support

Hi Winfred,

I downloaded the SDK mcu_plus_sdk_am243x_10_00_00_20, but I cannot find the project 'ind_comms_sdk_am243x_09_02_00_15'.  Could you point me to where this project is inside the SDK?

Thanks,

Baltasar

Hi Baltasar,

Below is the link to the TI page to download the SDK:

https://www.ti.com/tool/MCU-PLUS-SDK-AM243X 

The SDK:

INDUSTRIAL-COMMUNICATIONS-SDK-AM243X — Industrial Communications SDK for AM243x - RTOS

is available under the category 'Downloads' on the page.

Thanks

Winfred

Hi Winfred,

Could you please specify which project you are trying to import from the above SDK?  Could you let me know the relative path to the project within the SDK?

Thanks,

Baltasar

Hi Baltasar,

I was trying to import the project ethernetip_adapter_discrete_io_device_mii_demo_am243x-lp_r5fss0-0_freertos_ti-arm-clang.

I have now succeeded on importing it by re-installing the SDK from CCS resource explorer, but when building the project I receive the errors below:

Description Resource Path Location Type
gmake[3]: *** No rule to make target 'makefile_ccs_bootimage_gen'. ethernetip_adapter_discrete_io_device_mii_demo_am243x-lp_r5fss0-0_freertos_ti-arm-clang C/C++ Problem
gmake[3]: *** No rule to make target 'Sitara\ethernetip_adapter_discrete_io_device_mii_demo_am243x-lp_r5fss0-0_freertos_ti-arm-clang'. ethernetip_adapter_discrete_io_device_mii_demo_am243x-lp_r5fss0-0_freertos_ti-arm-clang C/C++ Problem
recipe for target 'post-build' failed makefile /ethernetip_adapter_discrete_io_device_mii_demo_am243x-lp_r5fss0-0_freertos_ti-arm-clang/Debug line 202 C/C++ Problem

The setting to 'Generate Makefiles automatically' from project properties is enabled.

Many thanks

Winfred

Hi Winfred,

please make sure that you follow this instruction to import the project:

AM64x MCU+ SDK: Using SDK with CCS Projects (ti.com)

Let me know if this time you can build the project.

Best regards
Pourya