TM4C1294NCPDT: boot_emac_flash appliction testing procedure

bala sund

Part Number: TM4C1294NCPDT

Tool/software:

Hi Team

Iam trying to flash my application firmware through ethernet in TM4C1294x EVK , Is there any full correct procedure or sample application for boot_emac_flash example to upgrade the firmware via Ethernet

Need Explanation in details please revert with full procedure asap.

over 1 year ago

0 Charles Tsai over 1 year ago

TI__Guru**** 191906 points

Hi,

You follow the instructions discussed in this post. https://e2e.ti.com/support/microcontrollers/arm-based-microcontrollers-group/arm-based-microcontrollers/f/arm-based-microcontrollers-forum/1360396/tm4c1294ncpdt-ethernet-firmware-update

0 bala sund over 1 year ago in reply to Charles Tsai

Prodigy 230 points

Hi Charles

iam getting the following error

0 Charles Tsai over 1 year ago in reply to bala sund

TI__Guru**** 191906 points

Hi,

Can you show your Configuration Tab?

0 Charles Tsai over 1 year ago in reply to Charles Tsai

TI__Guru**** 191906 points

Hi,

I have not heard back from you. Hope your issue is resolved. I will close this thread for now. If you have any update you can write back to this post and the status will automatically change to OPEN.

Arm-based microcontrollers

Arm-based microcontrollers forum

TM4C1294NCPDT: boot_emac_flash appliction testing procedure