MSPM0G3107: Internal pull-up/down resistance for GPIO

Kenley

Intellectual 1935 points

Part Number: MSPM0G3107

Tool/software:

Hi team,

About GPIO pins except ODIO is the internal pull-up/pull-down resistance correct at 40k Ω? (From mspm0g3107.pdf "7.10 Digital IO")

Thank you,

Kenley

over 1 year ago

0 Brian Dempsey over 1 year ago

TI__Expert 7065 points

Hi Kenley, thanks for the question. Yes the 40k resistance is the typical PU/PD resistance on the GPIO pins. There could be a slight drift at temperature extremes, but I believe these values are accurate.

-Brian

0 Keith Barkley over 1 year ago

Guru 43445 points

It might also vary from wafer to wafer, but in any particular chip it should be pretty close

Arm-based microcontrollers

Arm-based microcontrollers forum

MSPM0G3107: Internal pull-up/down resistance for GPIO